Archive for category Chemical

COPLAST 4 – PLASTICIZER for COALTAR PITCH

PLASTICIZER FOR COAL TAR PITCH / TAPE MADE FROM COAL TAR PITCH

Why is COPLAST 4 (Plasticiser for Coal Tar Pitch / Tapes made from Coal Tar Pitch) needed?

  • To impart plasticity without affecting penetration number.
  • To provide better heat and solvent resistance
  • Helps in achieving petroleum insolubility.

In market there are many kind of plasticizers are available based on wax/wax derivatives.  COPLAST 4 (Plasticiser for Coal Tar Pitch / Tapes made from Coal Tar Pitch) is unique plasticizer which is not wax/wax derivative that C.G. Chemical manufactures.

COPLAST 4 (Plasticiser for Coal Tar Pitch / Tapes made from Coal Tar Pitch) is not wax/wax derivative. COPLAST 4 (Plasticiser for Coal Tar Pitch / Tapes made from Coal Tar Pitch) is compatible with most materials used in Coal Tar Industry.

COPLAST 4 (Plasticiser for Coal Tar Pitch / Tapes made from Coal Tar Pitch) is proprietary polymer.

COPLAST-4 (Plasticiser for Coal Tar Pitch / Tapes made from Coal Tar Pitch) has unique heat, water & solvent resistance. This when added as plasticizer along with coal tar material does not lower ring & ball softening point of coal tar material. At the same time it improves Needle Penetration from about 1 * 10-1 mm to about 5 * 10-1 mm.

COPLAST 4 (Plasticiser for Coal Tar Pitch / Tapes made from Coal Tar Pitch) has specific properties as below,

Chemical Nature Proprietary polymer
Physical Appearance Off White/Yellow Lumps/Flakes
Melting Point 84 ± 4⁰ C
Ionic Nature Non-ionic
Solubility in Water Insoluble
Solubility in Petrol Insoluble
Storage Store in a cool & dry place. Do not store above 50⁰C
Handling Non hazardous Adopt all normal precautions when handling chemical products.
Stability COPLAST-4 is stable for more than 12 months in the original sealed container.

NB: Above information is given to the best of my knowledge & without warranty on my part.

Tags:

CGSOFT NI 50 (Nonionic Softner)

SOFTENERS FOR TEXTILE INDUSTRY

Why are they needed?

  • To impart softness, smoothness, fullness, suppleness and appearance of the fabric
  • To provide better tear and abrasion resistance
  • Helps in Processing of sueding, napping, compressive shrinkage, crack marks prevention during dyeing, etc.

In market there are many kind of softeners available like anionic , cationic, nonionic and various combinations of them and others (silicon, amino silicon, reactive,..). CGSOFT NI 50 is one such softener that C.G. Chemical manufactures.

CGSOFT NI 50 ( Nonionic softener) does not have electrical charge where as anionic & cationic softeners have -ve & +ve electrical charge respectively. CGSOFT NI 50 ( Nonionic softener) is compatible with most textile auxiliaries either anionic or cationic used in the bath, which are widely used for achieving dry, pliable hand & good resistance to discoloration.

CGSOFT NI 50 ( Nonionic softener) is usually derived form fatty acids/alcohols

CGSOFT NI 50 ( Nonionic softener)  has specific properties as below,

Chemical Nature Fatty Acid/Alcohol derivatives
Physical Appearance Smooth whitepaste
pH ≥ 7
Ionic Nature Nonionic
Dilution Can be dispersed/diluted with cold (30⁰- 35⁰ C) water
Storage Store in a cool place & keep lid close when not in use to avoid oxidation & dehydration
Handling Non hazardous

NB: Above information is given to the best of my knowledge & without warranty on my part.

Tags:

Paying the bills.!